Ncstar DRGB135 Manuel d'utilisateur télécharger pdf (Page 6)

3. Remove the old battery and dispose of it properly. Replace it with a NEW CR2032 (13) 3 volt

Lithium Battery type only. Twist the Battery Cap (11) back clockwise onto the Rheostat Knob

(3) and hand tighten. Avoid using tools (such as pliers) to perform this procedure as this may

cause damage to the unit.

CARE AND MAINTENANCE

Your DRGB135 is a sealed unit, please do not attempt to take it apart or clean it internally. The

exposed optical lens surfaces will perform their best if they are routinely cleaned with a lens brush

and the lens cloth provided with your sight. For a deep cleaning, you can also use high quality

camera lens paper and camera lens cleaning solutions. Never use any other type of materials or

solvents other than those designed specifically for optical lenses to avoid damaging your sight. Clean

the outer portion of the lens cavity first with cotton swabs, clearing as much debris and dust as

possible. Then, gently clean the lenses using a circular motion starting in the center and ending at

the edges. Do not rub the lenses continually; simply wipe in short circular patterns. Maintain the

exterior surfaces of the scope by removing dirt or sand by using a soft brush or a soft, dry cloth. You

can also use a silicone treated cloth to restore luster of the optics body and protect the scope against

corrosion. Be careful not to touch any of the lenses with the silicone cloth. When not in use, always

store your sight in a dry place with lens covers on to prevent scratches to the lenses.

If you are not sure about any of the procedures in this manual, always

seek the help of a qualified professional to avoid damage to your optic

and your firearm.

1 2 3 4 5 6 7

Pas de commentaire

Ncstar DRGB135 Manuel d'utilisateur Page 6